Industrial Gen 2 Accelerometer - Tilt Detection


  • Part #:RFI-0241-2
  • Weight:4.7 ounces
  • Availability: Inquire

Price: $215.25
Price: $294.89


Description

Scigiene’s GEN 2 Wireless Tilt Detection Sensor is a digital, low-power, low-profile, MEMS based sensor that detects changes in tilt on a single axis and reports data in the form of pitch, based on user configurable orientation changes. The sensor also reports rise/fall time and the current sensor orientation/trigger state. The Tilt Detection Sensor constantly monitors a single axis of rotation over a range of -179.9° to +180.0°. The data is displayed in degrees with 0.1° of resolution. The axis or rotation is user selectable. The axis image below indicates the axis of rotation and the arrow indicates the direction of increasing pitch angle (0° to 180° ˃ -180° to -0°).

Features:

  • Wireless range of 1,200+ feet through 12+ walls
  • Frequency-Hopping Spread Spectrum (FHSS)
  • Improved interference immunity
  • Improved power management for longer battery life
  • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
  • All Gen 2 sensors now have up to 3200 readings: 10-minute heartbeats = 22 days, 2-hour heartbeats = 266 days
  • Over-the-air updates (future proof)

Specifications:

Supply voltage

2.0-3.8 VDC (3.0-3.8 VDC using power supply)

Current consumption

0.2 µA (sleep mode), 0.7 µA (RTC sleep), 570 µA (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode)

Operating temperature range (board circuitry and battery)

-40°C to +85°C (-40°F to +185°F)

Included battery

Max temperature range

-40° to +85°C (-40° to +185°F)

Capacity

1500 mAh

Optional solar feature

Solar panel

5VDC/30mA (53mm x 30mm)

Charging temperature range

0° to 45°C (32° to 113°F)

Max temperature range

20° to 60°C (-4° to 140°F)

Included rechargeable battery

600 mAh/>2000 charge cycles (80% of initial capacity)

Solar efficiency

Optimized for high and low-light operation

Integrated memory

Up to 3200 sensor messages

Weight

4.7 ounces

Enclosure rating

NEMA 1, 2, 4, 4x, 12 and 13 rated, sealed and weather proof

UL rating

UL Listed to UL508-4x specifications (File E194432)

Certifications

900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1.

Sensor Specifications

Tilt Measurement Range

0.00° to 180.00° ˃ -179.99° to -0.01° (Rotating in positive direction)

Tilt Measurement Accuracy

+/- 0.5°

Tilt Measurement Resolution

0.01°

Rise/Fall Time Range*

0 to 65535 ms

Rise/Fall Time Accuracy*

+80 ms + Measurement Stability Configuration * 80 ms 

Rise/Fall Time Resolution*

~80 ms

Data States

Up/Down Mode: Up, Down, Stuck

Delta Mode: Delta Exceeded, No Delta Exceeded

Response Time

Up and Down: Determined by Measurement Stability Config

Stuck: Determined by Stuck Time Out Config

Delta Exceeded: 80 ms + Rearm Time after Previous Delta Exceeded Event

Technical Information

The Scigiene Calibration Lab provides a N.I.S.T.traceable certification and calibration service for (more...)

Required Accessories

Scigiene 21 CFR Part 11 Premiere is a secure cloud based monitoring and notification software dedica (more...)

Part #: RFR-0529-2
$288.75 (USD)
$395.59 (CAD)
The GEN2 Modbus Gateway acts as a data concentrator for Scigiene’s GEN 2 long range wireless sensor (more...)

Part #: RFR-0526-2
$231.00 (USD)
$316.47 (CAD)
The Gen 2 Ethernet Gateway allows your RF Wireless Sensors to communicate with the Scigiene Premier (more...)

Part #: RFR-0538-2
$404.25 (USD)
$553.82 (CAD)
The Scigiene GEN 2 4G Cellular Gateway allows you to control GEN 2 Wireless Sensor settings without (more...)

Part #: RFR-0539-2
$519.75 (USD)
$712.06 (CAD)
The Scigiene GEN 2 4G Industrial Cellular Gateway allows you to control GEN 2 Wireless Sensor settin (more...)